4.PRE- OPERATION
CHECK
NOTE
OIL
FILLER
HOLE
UPPER
LEVEL
WARNING
Be sure the generator is on a level surface and the
generator is stopped
4.1) Check Oil Level
Ensure engine is cool. Clear oil fill/dipstick areas
of any debris.
4.1.1) Remove the dipstick, and wipe clean.
4.1.2) Reinsert the dipstick into the oil filler hole
to
the lowest point of thread.
4.1.3) Remove the dipstick to check oil level. Level
should be above the lowest scale on the dipstick.
4.1.4) If the oil is low, add recommended oil up to
upper level of the oil filler hole.
4.1.5) Reinstall dipstick and tighten securely
Engine
Oil Capacity
CH440: 1.3L
■
Do
not
tilt
the
generator
when
adding
engine
oil. This could
result
in
overfilling
and
damage
to
the
engine.
■
Do not use poor quality oil. It will reduce
engine life and void warranty.
■
Use only high quality 4 stroke synthetic
blended engine oils certified to meet or
exceed API standards: SG, SF, SE.
<<12>>
