Toolex 535819, Инструкция по эксплуатации

Страница: 21 / 39

20
4. Put down the guards (N) as Fig.20 and lock the handle(M), then fix the handle(M) as Fig.21.
Fig.20 Fig.21
Check the 45
O
setting. Tilt the blade with the bevel hand wheel as far as it will go to the left. Place
the square against the blade (be sure the square is not against one of the saw teeth). If the blade is
not at 45
O
, unscrew the 45
O
stop screw, turn the hand wheel until the blade is correct, and tighten
the screw. Recheck and repeat it necessary.
Check that the scale indicator is at45
O
.
If not, loosen the scale indicator with a screwdriver, adjust it within the slot, and retighten the screw.
Fig.22
SWITCH INSTALLATION: