Toolex 535819, Инструкция по эксплуатации

Страница: 20 / 39

19
6. Use the set screws shown in Figure 17 to adjust the riving knife bracket and re-install the riving
knife.
Fig.17 (set screw for adjusting riving knife)
7. Repeat step 3-7 until the riving knife is centered on the blade and aligned at 90
∘
to the table.
8. Position the riving knife about 3mm or 1/8” away from the nearest carbide tooth on the main
blade.
9. Lock the riving knife on the safety and appropriate position.
ASSEMMBLE THE BLADE GUARD:
1. Before installation the blade guard, please confirmed Fig.18 the handle (M) keep on open as
Fig.19.
Fig.18 Fig.19
2. Pull up the guards as Fig.18.
3. Insert the guards on the position O & P of spreader as Fig.18.
N
M
O
P