Toolex 535819, Инструкция по эксплуатации

Страница: 10 / 39

9
Fig1.4
Anti-Kickback Pawls
Toothed safety devices behind the blade designed
to stop a workpiece from being kicked back at the
operator during a ripping operation.
Arbor
The shaft on which a blade or cutting tool is
mounted.
Bevel Cut
A cutting operation made with the blade at any
angle other than 90
°
to the saw table.
Compound Cut
A cut with both a miter angle and a bevel angle.
Crosscut
A cutting operation made across the grain or the
width of the workpiece.
Dado
A non-through cut that gives a square notch or
though; requires a special blade.
Feather board
A device to help guide workpieces during rip cuts.
Freehand(for Table Saw )
Dangerous practice of making a cut without using
rip or miter fences. See Safety Rules.
Gum
A sticky, sap-based residue from wood products.
Heel
Alignment of the blade .
Kerf
The material removed by the blade in a through cut or
the slot produced by the blade in a non-through cut.
Kickback
A hazard that can occur when blade binds or stalls,
throwing workpiece back toward operator
.
Leading End
The end of the workpiece pushed into the cutting tool
first.
Miter Cut
A cutting operation made with the miter gage at
any angle other than 0
°
Molding
A non-through cut that gives a varied shape to the
workpiece and requires a special blade.
Push Stick
A device used to feed the workpiece through the
saw blade during narrow cutting operations. It
helps keep the operator’s hands well away from
the blade.
Rabbet
A notch in the edge of a workpiece.
Re saw
A cutting operation to reduce the thickness of the
workpiece in order to make thinner pieces.
Resin
A sticky, sap-based substance.
Rip Cut
A cut made with the grain of the workpiece
.
Saw blade Path
The area directly in line with the blade –over,
under, behind, or in front of it. Also, the workpiece
area which will be or has been cut by the blade
.
Set
The distance that the tip of the saw blade tooth is
bent (or set ) outward from the face of the blade.
Throw-Back
Saw throwing back a workpiece; similar to
kickback.
Through Sawing
Any cutting operation where the blade extends
completely through the workpiece.
Trailing End
The workpiece end last cut by the blade in a rip
cut.
GLOSSARY OF TERMS FOR WOODWORKING