2
Operating Instructions
PL012 Rechargeable Penlight
Item no: 2497598
1 Intended use
The product is a rechargeable penlight. Features include front and side lighting and pocket clip magnet.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Product
■
Micro-USB to USB-A charging cable (1 m)
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code shown. Fol-
low the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised re-
pair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the product.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-
anteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Li-ion battery
■
The rechargeable battery is permanently built into the product and cannot be replaced.
■
Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might
cause an explosion or a fire!
■
Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product
into fire. There is a danger of fire and explosion!
■
Charge the rechargeable battery regularly, even if you do are not using the product. Due to the re-
chargeable battery technology being used, you do not need to discharge the rechargeable battery
first.
■
Never charge the rechargeable battery of the product unattended.
■
When charging, place the product on a surface that is not heat-sensitive. It is normal that a certain
amount of heat is generated during charging.
5.6 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
6 Operation
6.1 Recharge the battery
Important:
– Switch the power OFF before charging.
– Fully charge the battery before using for the first time.
– Fully charge the battery before storing away.
1. Insert one end of the charging cable into the
5V/1A
input.
2. Insert the other end of the charging cable to a suitable USB-A (5 V/DC, min. 1 A) power supply.
- Red indicator: charging in progress
- Green indicator: fully charged
- Reconnect the charging cable if the charging indicator does not light up.
3. Disconnect the charging cable after the battery is fully charged.
6.2 Light modes
Press the power button repeatedly to cycle through modes:
Side light ON → Front light ON → power OFF .
7 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage
the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Clean the product with a dry, fibre-free cloth.
8 Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU mar-
ket. This symbol indicates that this device should not be disposed of as unsorted municipal
waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separ-
ately from unsorted municipal waste. Spent batteries and accumulators, which are not en-
closed by the WEEE, as well as lamps that can be removed from the WEEE in a non-de-
structive manner, must be removed by end users from the WEEE in a non-destructive man-
ner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste.
Conrad provides the following return options
free of charge
(more details on our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points set up by man-
ufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries
outside of Germany.
9 Technical data
This product contains a light source of energy efficiency class E.
Input .......................................................
5 V/DC 1.0 A
Rechargeable battery .............................
3.7 V 750 mAh, 2.78 Wh Li-ion, type 14500
Recharge time ........................................
2.5 hrs
Battery life (full charge)...........................
Side light: 3.5 hrs
Front light: 4.5 hrs
Ingress protection ...................................
IP20
Impact protection rating ..........................
IK07
Colour rendering index (CRI)..................
80
Light source............................................
Side light (SMD LED): 120 lm, 6500 K, max. 1.1 W
Front light (SMD LED): 80 lm, 7000 K, max. 0.75 W
Operating conditions...............................
-10 to +40 °C, ≤ 85 % RH
Storage conditions..................................
-20 to +50 °C, ≤ 85 % RH
Dimensions (L x W x H)..........................
170 x 25 x 21 mm
Weight ....................................................
57 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2497598_V1_0622_dh_mh_en
554009739-2
I1/O1
en
