Tong Yi Fang Glass Machinery co.,ltd.
- 4 -
/
7
III. Maintenance
It’s very important to do proper maintenance for the machine, so that the
machine can have longer using life. Checking the moving parts and key
parts are very necessary.
3.1 The speed changing system inside the CVT, need to keep lubricate,
(when adding the lubricating oil, please use the CVT oil VB-1.)
3.2 The CVT oil has been added enough before loaded from the factory.
(Please check if the oil level has been at the middle in the oil box.)
And please notice, don’t try to use other kinds of the oil, it might cause the
machine working unstable, easy to get broken on the friction surface, and easy to get
increased with the temperature.
3.3 The first time to change the oil, is after 300 hours working, and then
please change the oil again every 1000 hours.
Inject he oil from the injection hole, to the middle of the oil mirror, don’t
be excessive.
3.4 Please particularly notice, the speed regulating hand wheel can be
rotated only when the machine is working.
3.5 The way of changing oil for the worm gear box of the brush section,
is the same as changing CVT oil.
3.6 The transmission chain needs to be changed the lubricate oil every 8
hours working.
3.7 Every bearing needs to be added the lubricate oil everyday.
3.8 Please also check if the water in the water tank is enough everyday,
