Tommy Bahama PARADISE KEY, Руководство пользователя

Страница: 15 / 20

15
Trouble Shooting
TROUBLE PROBABLE CAUSE SUGGESTED REMEDY
1. Fan will not 1. Fuse or circuit breaker 1. Check main and branch
start. blown. circuit fuses or circuit
breakers.
2. Loose power line connections 2. Check line power connections
to the fan, or loose switch wire to fan and switch wire
connections in the switch connections in the switch
housing. housing.
3. Wall switch is off. 3. Turn on wall switch.
4. Defective batteries in remote 4. Check that the batteries is good
control transmitter. (red indicator light should
illuminate when any button is
pressed).
5. Code switches in remote 5. Check that both code switches
control receiver and transmitter are set in the same position.
are not set in the same position.
WARNING: Make sure
main power is turned off.
2. Fan sounds 1. Blades not attached to fan. 1. Attach blades to fan before
noisy. operating.
2. Screws securing fan blade 2. Check to make sure the screws
flanges to motor are loose. which attach the blade flanges
to the motor are tight.
3. Wire connectors inside 3. Check to make sure wire
switch housing rattling. connectors in switch housing
are not rattling against each
other or against the interior
wall of the switch housing.
WARNING: Make sure main
power is turned off.
4. Screws holding blades to 4. Tighten screws securely.
flanges are loose.
5. Loose screws in motor 5. Check to make sure all screws
housing. in motor housing are snug
(not over-tight).
3. Fan wobbles 1. Setscrew in motor coupling 1. Raise coupling cover and
excessively. is not tightened securely. tighten setscrew securely.
2. Setscrew in the hanger ball/ 2. Tighten the setscrew in the
downrod assembly is loose. hanger ball/downrod assembly.
3. Screws securing fan blade 3. Check to be sure screws
flanges to motor are loose. which attach the fan blade
flanges to the motor are tight.
4. Fan blade flanges not 4. Check to be sure that the screws
seated properly. securing the fan blade flanges
seat firmly.
5. Hanger bracket and/or 5. Tighten the hanger bracket
ceiling outlet box is not screws to the outlet box,
securely fastened. and/or secure outlet box.
6. Fan blades out of balance. 6. Interchanging an adjacent
(side-by-side) blade pair can
redistribute the weight and
result in smoother operation.
Or use supplied balancing
kit to balance blades.
WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX
OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.
!
!
!
BP7288-1 TB301 Paradise Key 1/26/11 11:59 PM Page 15