Tomberlin E-MERGE 2007, Руководство по обслуживанию

Страница: 86 / 157

85
Removal of bulb of headlight and front turn signal
light:
1. Take out the key from the ke y switch.
2. Apply the parking brake.
3. Tu rn To w/Ru n switch to TOW.
P lease refer to Cha pter 1
“Protection for Electrical
Safety”
.
4. Disconnect the co nnecting wire of the headlight and the
cable plug-in package;
5. Remove the 4 screws fixing the headlight with a P hilips
driver;
6. Remove the headlight, pull apart the power co rd fro m the
headlight bulb;
7. Remove the 2 screws fixing the bu lb with a screw driver
and take out the headlight bulb.
8. Tu rn the lamp receptacle of the fro nt turn signal light and
remove the tu rn signal lamp bu lb.
9. Check the bulbs o f the headlight and the turn signal lamp
for continuity and replace the part in case of un-continu ity.
Headlight installation:
Back to the abo ve o peration steps
NOTE:
Wiring of positive/negative poles of the bulb, wiring
position o f high/low beam.