TOLT Ability Drive ADT, Руководство пользователя

Страница: 14 / 32

14
First Use
1. Move the wheelchair to a safe location with plenty of clear space. Test the
wheelchair with the ATP in the seat, not the owner of the wheelchair. Hold
the emergency stop / buddy button in your hand while initially testing and
configuring the speed and turn parameters of the chair.
2. Calibrate eye gaze on the eye gaze device. See the documentation of the
eye gaze device to determine how to calibrate.
3. Launch the Ability Drive
TM
application on the eye gaze device. When the
application is running and the ADT is connected to the eye gaze device one of
the LED’s on the ADT will light up. Note: that no LED’s will be lit if the Ability
Drive application is not running on the eye gaze device.
4. Look at the forward button, the wheelchair should move forward if properly
configured. Note: when a drive command is being sent to the chair the second
LED will light up.
5. Perform the Safety Evaluation with the user.
6. Train the user on how to use Ability Drive.
7. Leave this documentation with the user.
For a list of supported devices and additional documentation and videos of how
to configure a power wheelchair, installing the ADT and Ability Drive
TM
, and using
Ability Drive
TM
see:
tolttechnologies.com/support