11
For Assistive Technology Professional(ATP)
Installing the ADT
1. Configure the wheelchair’s input port to be SWI on Permobil or 4-Switch on
Quantum. Do NOT use proportional input or 3- Switch.
2. Connect the 9-pin cable to the ADT (Ability Drive
TM
Interface Box) and the
wheelchair’s input port.
3. Connect a buddy-button, as a power switch, to the input jack next to the
input port. If the wheelchair owner is unable to press the buddy button, it is
recommended to affix the buddy button near the back of a headrest where a
caregiver can easily access it.
Содержание Ability Drive ADT
Страница 1: ...Ability DriveTM Manual ...
Страница 2: ......
Страница 18: ...18 Evaluation Notes ...
Страница 32: ......