background image

29

How Do You Obtain Warranty Service?

To submit a warranty claim, please send an email to 

[email protected]

 with the following information:

∑  Submit a description of the problem, the product serial number(s), and any photos that you might have to the authorized distributor from 

whom you purchased the product.

o  If you do not receive satisfactory warranty service or you cannot locate the authorized dealer from whom  you purchased the product, 

then call Tolt Technologies Technical Service Supervisor at 1-425-242-3902.

∑  In the event of a defect in material or workmanship, Tolt Technologies will issue a return authorization number.

o  You must receive a written return authorization before returning any product for repair or replacement.

o  Tolt Technologies will not pay for repairs or replacement that were not authorized in advance.

∑  Products, components, or parts approved for replacement by Tolt Technologies must be returned to Tolt Technologies freight- prepaid.

o  You must pay any transportation or similar costs associated with returning or replacing a defective product.

o  Tolt Technologies recommends that you insure the product for its full replacement cost when shipping.

What Are Your Remedies Under this Limited Warranty?

Our responsibility under this warranty is limited to the repair or replacement of the affected product or component. 

Tolt Technologies will 

advise or instruct its authorized distributor to either repair or replace the product or component. Tolt Technologies has the option, in its sole discretion, 

to determine whether to repair or replace the product or component.

L

IMITATION OF LIABILITY

.

TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THE REPAIR OR REPLACEMENT OF THE 

AFFECTED  PRODUCT CONSTITUTES YOUR SOLE REMEDY AND TOLT TECHNOLOGIES’ ONLY OBLIGATION 

UNDER THIS WARRANTY.

 

TOLT TECHNOLOGIES SHALL HAVE NO OTHER OBLIGATION WHATSOEVER, AND 

NEITHER TOLT TECHNOLOGIES NOR ANY OF ITS AUTHORIZED DISTRIBUTORS SHALL HAVE ANY OTHER 

LIABILITY WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING, WITHOUT LIMITATION, ANY 

LIABILITY FOR ANY OTHER COSTS OR DAMAGES THAT YOU MAY SUFFER, SUCH AS LOSS OF USE, LOST 

PROFITS, CONSEQUENTIAL, SPECIAL, INCIDENTAL, EXEMPLARY, OR PUNITIVE

 

DAMAGES OR LOSSES, 

WHETHER DIRECT OR INDIRECT, INCLUDING BUT NOT LIMITED TO ANY DAMAGES IN THE FORM

 

OF LEGAL 

FEES, ECONOMIC LOSS, PERSONAL INJURIES, OR ANY DAMAGES CAUSED BY CIRCUMSTANCES BEYOND 

THE CONTROL OF TOLT TECHNOLOGIES. IN NO EVENT SHALL DAMAGES FOR BREACH OF ANY WARRANTY 

EXCEED THE ORIGINAL COST OF THE PRODUCT.  FURTHERMORE, TOLT TECHNOLOGIES SHALL NOT 

BE LIABLE FOR ANY LOSS OR DAMAGES RESULTING FROM A CAUSE OVER WHICH WE DO NOT HAVE 

CONTROL, INCLUDING WITHOUT LIMITATION: (I) UNAUTHORIZED OR NEGLIGENT USE OF THE PRODUCT, 

(II) UNSAFE OPERATION OF THE PRODUCT; (III) ANY AUTHORIZED DISTRIBUTOR

S FAILURE TO COMPLY 

WITH APPLICABLE LAWS OR ANY DISTRIBUTOR

S INTENTIONAL, NEGLIGENT OR WRONGFUL ACTIONS 

OR OMISSIONS; OR (IV) ANY OTHER ACTS, OMISSIONS, NEGLIGENCE OR CONDITIONS OUTSIDE OF OUR 

CONTROL, INCLUDING WITHOUT LIMITATION, FAILURE OF ELECTRONIC OR MECHANICAL EQUIPMENT, 

OR OTHER INTERCONNECT PROBLEMS, OPERATOR ERRORS, MECHANICAL FAILURES OR DIFFICULTIES. 

IN SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE 

ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

Содержание Ability Drive ADT

































Отзывы: