TOLSEN TOOLS 79991, Инструкция по эксплуатации

Страница: 8 / 24

Grounding
High Altitude Operation Above 3000 feet
INITIAL TOOL SET UP/ASSEMBLY
8 SETUP
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY: Operate only with proper spark arrestor installed. Operation of this
equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required.
The operator should contact local fire agencies for laws or regulations relating to fire prevention
requirements.
At high altitudes, the engine’s carburetor, governor, and any other parts that control the fuelair ratio will
need to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent damage to
the engine and any other devices used with this product.
Note:
For additional information regarding the parts listed in the following pages, refer to the Assembly
Diagram near the end of this manual.
The Generator must be properly grounded before use. Have the unit grounded by a qualified electrician if
you are not qualified to do so.
To ground the Generator, connect a 13.3mm² grounding wire (not included) from the Grounding Terminal
on the Control Panel to a grounding rod (not included) that has been driven at least 24 inches deep into
the earth. The grounding rod must be an earth-driven copper or brass rod (electrode) which can
adequately ground the Generator.
TO PREVENT SERIOUS INJURY FROM FIRE:
Follow instructions in a well-ventilated area away from ignition sources. If the engine is hot from use, shut
the engine off and wait for it to cool before proceeding. Do not smoke. NOTICE: Warranty void if
necessary adjustments are not made for high altitude use.
At high altitudes, the engine’s carburetor, governor, and any other parts that control the fuel-air ratio will
need to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent damage to
the engine and any other devices used with this product. The fuel system on this engine may be influenced
by operation at higher altitudes. Proper operation can be ensured by installing an altitude kit at altitudes
higher than 3000 ft. above sea level. At elevations above 8000 ft, the engine may experience decreased
performance, even with the proper main jet. Operating this engine without the proper altitude kit installed
may increase the engine’s emissions and decrease fuel economy and performance. The kit should be
installed by a qualified mechanic.