TOLSEN TOOLS 79991, Инструкция по эксплуатации

Страница: 15 / 24

When the equipment is to remain idle for longer than 20 days, prepare the Engine for storage as follows:
1. CLEANING:
Wait for Engine to cool, then clean Engine with dry cloth.
NOTICE: Do not clean using water. The water will gradually enter the Engine and cause rust damage.
Apply a thin coat of rust preventive oil to all metal parts.
2. FUEL:
To protect the fuel tank during storage, fill the tank with gasoline that has been treated with a fuel stabilizer
additive. Follow fuel stabilizer manufacturer’s recommendations for use.
WARNING! TO PREVENT SERIOUS INJURY FROM FIRE:
Fill tank in a well-ventilated area away from ignition sources. If the engine is hot from use, shut the engine
off and wait for it to cool before adding fuel. Do not smoke.
Air Filter Element Maintenance
Spark Plug Maintenance
Long-Term Storage
MAINTENANCE
OPERATING INSTRUCTIONS 15
1. Remove the air filter cover and the air filter elements and check for dirt.
2. Install the cleaned filter. Secure the Air Cleaner Cover before use.
1. Disconnect spark plug cap from end of plug. Clean out debris from
around spark plug.
2. Using a spark plug wrench, remove the spark plug.
3. Inspect the spark plug: If the electrode is oily, clean it using a clean, dry
rag. If the electrode has deposits on it, polish it using emery paper. If the
white insulator is cracked or chipped, the spark plug needs to be replace.
NOTICE: Using an incorrect spark plug may damage the engine. See the Specifications chart for your
Generator for the type and gap required.
4. When installing a new spark plug, adjust the plug’s gap to the specification on the Specifications
chart. Do not pry against the electrode, the spark plug can be damaged.
5. Install the new spark plug or the cleaned spark plug into the engine. Gasket-style: Finger-tighten until
the gasket contacts the cylinder head, then about 1/2-2/3 turn more. Non-gasket-style:
Finger-tighten until the plug contacts the head, then about 1/16 turn more.
NOTICE: Tighten the spark plug properly. If loose, the spark plug will cause the engine to overheat. If
overtightened, the threads in the engine block will be damaged.
6.Apply dielectric spark plug boot protector (not included) to the end of the spark plug and reattach the
wire securely.