Tolis Group ArGest TGL1800, Руководство пользователя

Страница: 20 / 39

Make sure that if you are connecting the Library to a FC switch that you have read the Planning the
Fibre-Channel Configuration at the beginning of this chapter.
Connecting a Second Tape Drive
Connect the second FC tape drive in the same manner as the first drive.
Connecting the Library: Parallel SCSI
Attach one end of the parallel SCSI cable to the top parallel SCSI port on the tape drive. Attach the
other end of the SCSI cable to the host bus adapter (HBA) or to the previous parallel SCSI device on
the SCSI bus chain.
If the tape drive is the last device on the SCSI chain or is the only device on the SCSI bus, then a
parallel SCSI terminator (included in hardware bundle) is required to be added to the bottom port of the
parallel SCSI port on the drive.
Always make sure that the last device on a parallel SCSI chain is properly terminated.
Connecting a Second Tape Drive
If the Library has two parallel SCSI drives, attach one of a parallel SCSI cable to the HBA on the
system. Attach the other end to the
bottom port on the bottom tape drive.
Using another parallel SCSI cable, attach one end to the top port of the bottom tape drive. Attach the
other end of the parallel SCSI cable to the bottom port of the top tape drive.
If the tape library is the only device or the last device on the parallel SCSI chain, use the provided
parallel SCSI terminator to terminate the chain by attaching the terminator to the
top parallel SCSI port
of the top tape drive.
20