Toledo PWi Forging, Руководство пользователя

Страница: 39 / 92

PWi Forging User’s Manual
Doc #17663 Rev A Page
Toledo Integrated Systems
37
To pause and resume the signature updating
1) While the right menu is showing PAUSE:
Push to stop the signature updating. The right menu now changes to BACK. In
this state, the press can continue to run but the signatures will not update. Also, notice
that the corner selection menu option has shifted from the center menu to the left menu
position. While the signature is paused, the and buttons are used to cycle
through each of the corners.
2) While the right menu is showing BACK:
Push again to resume the signature updating.
Signature Updating Signature Paused
To save and load signatures
1) While the signature is paused and the center menu is showing ANLYZ:
Push or to access the signature analysis tools. The center menu is now
selected and the right menu now changes to APPY.
With the center menu showing MEM, push to access the various memory options.
2) To save the current signature:
Push or to cycle through the memory options until SAVE1 or SAVE2 is
selected.
Push to save the current signature to the corresponding memory location.
3) To load a previously saved signature:
Push or to cycle through the memory options until LOAD1 or LOAD2 is
selected.
Push to load the signature.
While the signature is being viewed, the current signature number is shown at the top
left corner of the display and the following options are available:
Push or to cycle through the corners, or
Push or to select the Cursor tool for point-by-point analysis, or
Push to close the signature and resume signature updating.