Tokyo Keiki TG-8000 Series, Руководство оператора

Страница: 47 / 105

3
－
15
3. Determine it by pushing ACK/ENT switch
④
.
4. When "MANUAL" was selected, ship's speed is indicated in the indicator. Then,
set ship's speed by pushing
△
or
▽
switch
⑤
, and push ACK / ENT switch
④
again.
(8) Setting of the
“rate of turn filter constant”
CAUTION
●
Whenever to complete the setting, push ACK / ENT switch
④
. Changed setting is
not updated unless pushing ACK / ENT switch
④
.
1. Let the indicators be in the following
“rate of turn filter constant” indication state by
pushing DISP switch
②
.
2. When the
“rate of turn filter constant” is changed, push SET switch
③
.
データ表示部
モード表示部
Rate of Turn Filter
3. Select the
“filter constant” by pushing
△
or
▽
switch
⑤
.
The
“filter constant” can be set to 0.5, 1 or 2 through 10 in 2 seconds step.
4. Determine it by pushing ACK / ENT switch
④
.
(9) Confirmation of the true heading
CAUTION
●
When the gyrocompass true heading is set again, the repeater indication value and the
serial signal gyrocompass true heading will change by the changed angle.
During the automatic steering, once turn the steering mode of the automatic steering
system to "MANUAL" to prevent a large course changing, and after confirming
surrounding safety of own ship, turn to "AUTO" steering again.
CAUTION
●
Whenever to complete the setting, push ACK / ENT switch
④
. Changed setting is
not updated unless pushing ACK / ENT switch
④
.
データ表示部
モード表示部
Data indicator
Mode indicator
Data indicator
Mode indicator