Thank you for purchasing the
TELI
CS8330B/CS8330BCCS8311BC TV B/W
camera featuring compact and light weight.
To take best advantage and gain the most service from your camera,
read this operation manual carefully and thoroughly.
1. FEATURES
* Compact and light weight.
* Available External sync-operation.
* One piece configuration.
* Equipped with AGC (Automatic Gain Control) which allows wide
dynamic range from bright to dark subjects.
* Equipped with an electronic shutter for fast moving subjects for
better definition picture.
* Using the Restart-Reset function, it is possible to acquire the image
at any timing according to the R.R pulse input (VD input). (This
function can be turned ON/OFF by an internal switch.)
* Using the special shutter function, it is possible to acquire the image
at any shutter timing or shutter speed according to the shutter trigger
and R.R pulse inputs. (This function can be turned ON/OFF by an
internal switch.)
2. PRECAUTION
(1) This equipment should be used with DC12V only.
To prevent electric shocks and fire hazards, do not use any other
power source.
(2) The CS8330B/CS8330BC is designed to be used with EIA/CCIR
monochrome television signals. It cannot be used for playback
with a television of a different standard.
(3) Please handle the equipments carefully.
- 1 -
(4) Do not point your camera lens directly into sunlight or strong
artificial light. This might cause irreparable damage to the image
sensor.
Also, be sure to use the lens cap when the camera is not in use.
(5) Do not expose the camera unit to high temperatures. For example,
do not place it near a stove for long periods, or in direct sunshine
or in a car in hot weather. Heat may cause some malfunction.
(6) Keep the camera clean. Dust can damage the camera and cause
trouble in moving parts.
Take particular care to avoid the entry of sand or grit when
changing the camera lens.
(7) Avoid jolting the equipments or exposing it to vibration.
(8) Never attempt to dismantle the equipments.
(9) Avoid folding or stretching the camera cable or other connection
cable between equipments.
(10) When the cabinet is dusty, clean by gently wiping with a soft
cloth. And avoid the use of strong cleaning agents such as
benzine or alcohol as they may damage the cabinet.
IMPORTANT
The camera provides four screw holes at the bottom chassis
which are used to mount the attachment plate for tripod and so
on.
Do not use longer screws over 4mm. Because there is a
printed circuit board closed to the bottom chassis, and the PC
board may cause damage it.
- 2 -
