11
Alarm mode
Alarm Action Value
Alarm hysteresis value
Alarm Unit
Alarm start delay
Alarm finish delay
When character “ do ” is remote control mode, otherwise it is alarm mode
reference "4.9 alarm, transmission parameter comparison chart"
1st alarm value setting, consistent with the basic display unit
alarm start delay time , unit : second
alarm finish delay time , unit : second
1st alarm hysteresis value setting, consistent with the basic display unit
1: means international standard unit, K: means 1000 times of international
standard unit, M: means1000000 times of international standard unit.
Alarm relay setting
1st alarm relay output setting
/
/
/
Switch
2nd loop alarm parameter setting way refers to the 1st loop alarm
Continued from the front chart
Period 12 rates, 0,1,2,3 stands sharp, peak, flat, valley
Period 1 Start Time
Period 2 Start Time
Period 12 Start Time
Period 12 rates
Period 1 Start time
Period 2 Start time
Period 12 Start time
Multi-rate
setting
Minute
Second
Minute
Second
Period 1 rates, 0,1,2,3 stands sharp, peak, flat, valley
Period 2 rates, 0,1,2,3 stands sharp, peak, flat, valley
Period 1 rates
Period 2 rates
Time setting
Year
Month
Day
Hour
Year
Month
Day
Hour
Transmit high limit
Transmit low limit
Analog output
Transmit output 20mA
Transmit output 4mA
Transmit mode selection
Refer to “4.9 alarm, transimission parameter comparison chart”
Transmit unit
1: means international standard unit, K: means 1000 times of international
standard unit, M: means1000000 times of international standard unit.
/
/
Settings
