10. MODE SELECTION / MUTE CONTROL
a) Briefly press it to select Radio (TUNER), CD/MP3 (S-CDP), USB (USB-DRIV), SD (MEM-CARD) or Auxiliary Input (AUX)
mode.
b) When pressing the button for more than 2 seconds, it will mute volume control and “MUTE ON” will appear on the display.
11.
You can enjoy RDS advantages on FM radio as following.
l
Program Service Name (PS) : When an RDS station is received, station's name will appear on the display.
l
Traffic Program (TP) : When station with traffic program is received, “TP” indicator will appear on the display.
l
Alternative Frequencies (AF) : The unit continuously checking the signal strength of alternative frequencies for the tuned
radio station. Every time that new alternative frequency is stronger than current station, it automatically switch over to the
new frequency and new frequency will be displayed for 1-2 second. When the button pressed short, AF switching mode
is selected and the state of AF switching mode will appear on the display as following.
-RDS indicator on : AF mode is on and RDS signal is received.
-RDS indicator off : AF mode is off.
-RDS indicator flashing : AF switching mode is selected but RDS signal is not received yet.
l
Enhanced Other Networks (EON): An RDS service where the broadcaster links some stations together. When tuned to a
station which is linked to others by EON, the radio is capable of receiving Traffic Announcement from the linked stations.
l
Regional Program (for some countries only) : When tuned to a regional program, the radio will stay tuned to that
particular regional program as long as possible. If you drive out of the coverage area and the regional program becomes
very weak, the radio may tune to another regional program from the same network. To activate the regional program
function, pressing the button more than 2 seconds until “REG ON” appear on the display. To switch off the regional
program function, pressing the button more than 2 seconds until “REG OFF” appear on the display.
RDS (RADIO DATA SYSTEM) CONTROL
12.
Press the button to select TA mode on/off. When TA mode is on, “TA” indicator will appear on the display and the radio is
able to receive traffic announcements on the same stations or stations linked via EON with Traffic Program (TP). The TA
mode can work as following.
l
If the volume setting is very low, volume level will be raised temporarily during traffic announcement and back to
original volume level at the end of traffic announcement.
l
Temporary switch over to an EON linked program when EON detects a traffic announcement on that other program.
l
If the radio is muted, it will be de-muted for the duration of the traffic announcement.
l
If the unit is CD/MP3/USB/SD mode, it will switch temporarily to radio mode to receive Traffic Announcement.
TA (TRAFFIC ANNOUNCEMENT) CONTROL
13. PTY (PROGRAMME TYPE NAME) CONTROL
There are 2 series of programme type (PTY) available for PTY search tuning. Pressing PTY button once or twice and then
pressing any Station Preset Button (1-6) until the desired PTY code appears on the display. The radio will stop on station
transmitting the selected PTY code. Next PTY searching can be activated by repeating the same procedure. During
programme type searching, PTY button can be pressed to stop searching and the radio will back to the original station.
“PTY NONE” will appear on the display if the selected PTY code is not receivable.
14. VOLUME/SELECTION BUTTON (“VOL/SEL”)
Rotate the button anti-clockwise to decrease, or clockwise to increase volume level.
AUDIO LEVEL CONTROL (WHEN PUSHING ONE AFTER ANOTHER)
Press this button shortly one after another to show VOL/BAS/TRE/BAL/FAD control.
l
VOLUME - Press this button once, then rotate anti-clockwise to decrease, or clockwise to increase volume level.
l
BASS - Press this button once, then rotate anti-clockwise to decrease, or clockwise to increase bass level.
l
TREBLE - Press this button once, then rotate anti-clockwise to decrease, or clockwise to increase treble level.
l
BALANCE - Press this button once, then rotate anti-clockwise or clockwise to level balance of speaker right and left.
l
FADER - Press this button once, then rotate anti-clockwise or clockwise to level fader of speaker front and rear.
AUDIO/SETTING SELECT (HOLD MORE THAN 2 SECONDS)
When pressing the button for more than 2 seconds, it activates as unit setting selection in cyclical mode as following. The
unit setting can be changed by rotating the button clockwise or anti-clockwise.
l
TA SEEK / TA ALARM
l
MASK DPI / MASK ALL
l
RETUNE-S / RETUNE-L
l
DSP OFF / POP M / ROCK M / CLASS M / FLAT M
l
LOUD OFF / LOUD ON
l
MULT OFF / MULT ON (not available for this model)
l
SCROLL 1 / SCROLL 2 (display showing from left to right/right to left direction)
l
BEEP ON / BEEP OFF (not available for this model)
l
STEREO / MONO
l
DX / LOCAL
15/16. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL
On radio mode, pressing the button for more than 2 seconds, it will tune one frequency step higher or lower.
On CD/MP3/USB/SD mode, press this button will locate the beginning of the track being played or will locate the
beginning of the next track. When pressing more than 2 seconds, it will move fast forward or fast backward to a specific
position.
17. STATION PRESET BUTTON (1-6)
The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each preset button
can store FM1, FM2, FM3, MW1, MW2 band station frequency. Pressing the button momentarily recalls the station frequency
which was memorized. There are 6 preset buttons, giving you capability of storing 18FM / 12MW.
NOTE:
When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station frequency
will be stored in the button pressed. After this, the memorized station can be recalled by pressing the button once.
On CD / MP3 / USB / SD Mode
l
Preset 2 - press this button to scan the first 10 seconds of all the tracks on the CD / MP3 / USB drive / SD Card.
l
Preset 4 - press this button to play the tracks on the CD / MP3 / USB drive / SD Card in random order.
l
Preset 5 - press this button to search -10 track (For MP3/USB/SD mode only).
l
Preset 6 - press this button to 10 track (For MP3/USB/SD mode only).
19. RESET BUTTON
The RESET button is located on the front of main panel.
It is recessed in order to prevent accidental engagement,
and can be activated with the tip of a ball-point pen or any
similar pointed object. This reset circuitry is provided in order to protect the unit's microprocessor, and should only be
activated under the following conditions :
a) Initial installation after all wiring is completed.
b) Abnormal operation is encountered such as numerical indication on display is erratic.
c) Whenever the reset button is activated, all preset memory content will be erased and must be reprogrammed.
18. AUXILIARY INPUT
Press MODE button (10) until the “AUX” mode is shown on
display. The unit is ready to play songs on an external audio
device through the auxiliary input directly on the front panel.
MP3 OPERATION
FILE SEARCH
- Press “AMS” button
once and “FILE SCH” will be shown on the display.
- Press “VOL/SEL” button to enter file search mode.
- Rotate “VOL/SEL” button clockwise or anti-clockwise to view the directories.
- After the selected directory is selected, rotate “VOL/SEL” button clockwise or anti-clockwise to view the files.
- Press “VOL/SEL” button to play the selected file.
- If directories or files name is not entered within 10 seconds, the unit will continue playing the current file.
for more than 2 seconds, then press
TRACK SEARCH
- Press “AMS” button
and “TRK SCH” will be shown on the display.
- Press “VOL/SEL” button to enter track search mode and “TRK 0” will appear on the display for you to enter track
number.
- Rotate “VOL/SEL” button clockwise or anti-clockwise to shift number 0 - 9 in loop rotation.
- Press “VOL/SEL” button shortly to select the first digit.
- Repeat the same procedure to enter the other digits if required.
- After the track number is selected, press “VOL/SEL” button more than 2 seconds to start playing the selected track.
- If track number is not entered within 10 seconds, the unit will continue playing the current file.
for more than 2 seconds
CHARACTER SEARCH
- Press “AMS” button
twice and “CHAR SCH” will be shown on the display.
- Press “VOL/SEL” button to enter into character search mode and “
*
” will appear on the display for you to enter
first character.
- Enter whole name of files (maximum 8 characters) by rotating “VOL/SEL” button clockwise or anti-clockwise to
shift “A-Z”, “0-9” & “
*
” (space) in loop rotation.
- Press “VOL/SEL” button shortly to select the first character.
- Repeat the same procedure to enter the other characters if required.
- After the whole name of file is entered, press “VOL/SEL” button more than 2 seconds to start playing the selected
track.
for more than 2 seconds, then press
GB-2
GB-3
PLAY ON MP3 FILE
- Insert the media with MP3 song in the disc slot / insert the USB flash memory / insert the SD card. The unit will
start playing and checks all the files and folder on the media.
- If MP3 files and directories are recognized, the media will start playing.
- The MP3 files and directories are accessed according to the order written by the CD / USB flash memory /
SD card writer.
IMPORTANT NOTES
- The MP3 file recording media acceptable to this unit are CD-R, CD-RW, USB flash memory, SD memory card.
- The MP3 formats acceptable are limited.
- Do not attempt to play a media containing non-MP3 files or non-MP3 files with MP3 extension. Otherwise, the
CD Mechanism/USB Drive/MEM-CARD Drive will not be working properly. If “ERROR” is shown, it is suggested
to reset the radio by presssing the reset button.
Remark :
1) The media must contain directories or files name written by the CD / USB flash memory / SD card writer in order
to use in searching.
2) If only partial letters are entered for searching either in directories or files name, you may not get it correctly.
IMPORTANT
:
If you decide to connect your iPod with its original cable into the USB port,
it is a
MUST
to switch off the radio and wait 15 to 20 seconds before disconnecting the
cable.
OTHERWISE,
you will block your iPod and the car radio.
20. USB PORT
The unit is ready to play MP3 songs on an external USB device through the USB port directly on the front panel.
21. SD CARD SLOT
Holding the SD card and insert into the slot until you hear the lock sound (DRAWING C). The
unit will automatically engage into MEM-CARD play mode. If you want to eject the SD card,
just press the card inward until you hear the unlock sound and then release the card.
DRAWING C
MP3
INPUT
AUX
SD
*AUXILIARY INPUT*
Compatible with
MP3 player
CD player
MP3 jukebox
MP3
INPUT
AUX
SD