Toho Electronics TRM20A Скачать руководство пользователя страница 2

Страница: 2 / 146

- i -

To use this equipment safely

Thank you for purchasing our TRM20A Paperless Recorder.

Manufacturer

：

TOHO ELECTRONICS INC.

Model number

：

It is recorded in marking plate on the main body.

Serial number

：

It is recorded in marking plate on the main body.

Country of manufacture

：

Japan

Note1

：

Windows 7/8 / 8.1 / 10 and Excel are registered trademarks of Microsoft Corporation.

Note2

：

Modbus is registered trademarks of Schneider Electric.

Note3

：

Ethernet is registered trademarks of Fuji Xerox.

・

Please installs it, operates it and prepares it, after this manual is often read, and it understands enough.

There is danger where the accident and the trouble occur when handling is mistaken.

・

This specification of Recorder is subject to change without prior notice for product improvement.

・

It is prohibited to remodeling this Paperless Recorder without our permission.

It doesn't assume the responsibility about the accident caused by having remodeled it without our permission.

・

Please keep this manual if you actually use the Recorder.

・

After reading this manual, keep it carefully by the instrument.

・

Please consider this manual to be sure to extend to the final user.

・

Don't use this product in any method not specification by manufacturer. The protective features of this
product may be impaired if it is used in a method not specified in the operation manual.

・

It is prohibited to copy this manual without our permission.

・

This instruction manual is subject to change without prior notice.

[Note]

Содержание TRM20A


















































































































































Результаты поиска

Содержание TRM20A

Отзывы:

Toho Electronics TRM20A, Руководство по эксплуатации, Страница: 2 / 146

Результаты поиска

Содержание TRM20A

Отзывы: