Tohnichi DOTE100N4-G Скачать руководство пользователя страница 20

Страница: 20 / 28

IGIT
AL T

ORQUE WRENCH TES

TER
D

TE4-G

External Output Function

8-1. Printer Output

Connect the DOTE4-G and the Tohnichi printer (EPP16M3) using a printer cable
(Catalog No. 382). Set the communication output format to “Prn” and ensure that

other communication settings are consistent with the printer.

See “5 Various Settings” for the setting methods.

* Do not use a printer cable and a USB communication cable at the same time.

• Communication settings for the EPP16M3

Data format
Transmission system
Baud rate
Data length
Stop bit
Parity

: RS232C-compliant
: Start-stop synchronization serial
: 2400 bps

: 7 bits

: 1 bit

: None

(1) Progressive printing

Press the "

Memory/Reset"

button. In the progressive printing, the results of statistical processing

are not printed. In the Auto Memory/Reset mode, the results are automatically printed out.

(2) Continuous printing

Display the last count value in the print range and press "

STAT

" key. “

Stt

” is displayed.

Using ▲ or ▼ key, display the first count value in the print range and press "

STAT

" key.

Then, press ▲ key while “

” is displayed.

The data, sampling number “

”, maximum value “

”, minimum value “

” and

average value “

” in the specified range are printed out.

(3) Printing of only statistical processing value

Display the last count value in the print range and press "

STAT

" key. “

Stt

” is displayed.

Using ▲ or ▼ key, display the first count value in the print range and

press the "

STAT

" key. Then, press ▼ key while “

” is displayed.

The sampling number “

”, maximum value “

”, minimum value “

” and

average value “

” in the specified range are printed out.

Содержание DOTE100N4-G





























Результаты поиска

Содержание DOTE100N4-G

Отзывы:

Бренды по названию

Популярные бренды

Tohnichi DOTE100N4-G, Руководство по эксплуатации

Результаты поиска

Содержание DOTE100N4-G

Отзывы:

Бренды по названию

Популярные бренды