Tohnichi DOTE100N4-G, Руководство по эксплуатации

Страница: 2 / 28

Safety Precautions
Before using this product, please read this operating instruction carefully to use it properly. If you have any question,
please contact your nearest distributor or Tohnichi mfg. co., ltd. This operating instruction should be stored in a safe place.
Safety Symbol
This symbol is used for drawing attention to "safety precautions". If you see this symbol in this operating instruction,
attention should be paid to safety. Take preventative actions according to the description and conduct "safety
operations and proper control".
" Danger
"
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
"
Warning
" Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
"
Caution
" Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Warning
• Stop using the product when smoke comes out or strange smell or unusual noise occurs. In such occasions immediately
turn off the power, remove the AC adapter from the outlet and contact your nearest distributor or Tohnichi mfg. co.,ltd.
• Do not disassemble or modify this tester. It may result in loss of safety, degradation in functions, shortening of product life,
or failure.
• Stop using the product when contaminant or liquid such as water is into main unit. You may be exposed to the danger of
electric shock or fire.
• Do not use this tester with a power voltage other than that specified, AC100V-240V.
• When handling the power cable, follow the instructions below.
Do not handle the AC adapter with wet hand.
Do not damage, extend or heat the power cable.
Do not yank, pinch the power cable, nor put heavy objects on it.
Do not bend, twist nor bind the power cable by force.
Do not use the power cable for other purpose.
Do not use a damaged power cable of AC adapter.
• Do not place this tester on unstable place.
• Do not place this tester in a place where inflammable liquid or combustible gas is present.
• Use attached accessories. Do not use any other accessories.
Caution
• Do not put this tester in a place of much moisture or dust, in a place that is exposed to water or direct sunlight, or in a place where
the humidity or temperature fluctuates largely. It may result in electric shock, file, malfunction, degradation of performance or
failure.
• Clean the AC adapter periodically. Before cleaning, disconnect the plug from power outlet and clean the root of the plug.
• If this tester is not to be used for a long time, be sure to disconnect the AC adapter from power outlet.
• Before moving this tester to another place, be sure to power off, remove the AC adapter and disconnect all connection cable.
When moving the tester, avoid shock or vibration on it.
• Do not use this tester to conduct measurements beyond its capacity. For safe and efficient operation, use this tester to measure
the torque wrenches suited to the capacity. Measurement beyond the capacity may cause accident or damage.
• Check for any damaged parts. Before use, check the tester and the accessories, and make sure that it operates normally and
fulfills the specified functions. Check the parts and all other portions that may affect the operation for damage, installation status.
For replacement or repair of damaged parts, contact your nearest distributor or Tohnichi mfg. co., ltd.
Precautions for Use
Please operate this under recommended environment.
Do not disassemble or modify this tester.
Before use, make a start-up inspection and check the setting condition.
If this torque wrench tester gets wet with water or grease, it may bread down or burn out be careful not to drop water or grease.
Do not let this torque wrench tester fall or bump. It may result in damage or failure.
Use this torque wrench tester within the measurement range specified in the operating instruction.
Be sure to conduct a periodic inspection.
Before measurement, make sure that Zero is displayed.
Should the tester give out abnormal smell or catch fire during use, stop using immediately, move the tester to a safe place and
contact your nearest distributor or Tohnichi mfg. co., ltd.