manualshive.com logo in svg

Tohnichi DOTE100N4-G, Руководство по эксплуатации

Поделиться
Скачать
Tohnichi DOTE100N4-G Скачать руководство пользователя страница 17

14

D

IGIT
AL T

ORQUE WRENCH TES

TER
 D

O

TE4-G

(6) Turn the power switch on. 
      Before using, leave it on for at least 30 minutes for stabilization.
(7) Set each mode. Auto memory/reset, communication setting.

For the setting instructions, refer to section "5. Functions and Settings".

(8) Select adapter or socket based on the torque wrench to be calibrated.

(9) Set the measuring mode based on the torque wrench to be measured.

• Click type (model QL, SP, etc): Peak Hold Mode (PEAK)
• Direct-reading type (model CEM, DB, F, etc): Run Mode (RUN). 

For the setting instructions refer to section "#5. Functions and Settings".

(10) Press the "

C

" key with no load to zero the tester.

Torque Display

Clear key

Statistical processing key

Mode key

Counter/Upper-limit Value Display

Upper-/Lower-limit value

Selection/Lower-limit value display

▼ Mark display

Count forward key

Count backward key

Memory/Reset button

Содержание DOTE100N4-G





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды