Todo HS-00808, Инструкция по эксплуатации

Страница: 17 / 76

17
ENGLISH
SETTINGS GUIDE
TYPE PLATE SETTING
EMBOSSING
Folder C & B 5-8
DIE CUTTING
Thin Metal Dies* A & B 6-8
Complex (Intricate) Thin Metal Dies A & D 4-6
Thin Foam Topped Dies A 2-3
Thick Foam Topped Dies A & B† 3-5
HOT FOILING
TODO™ Hot Foil & Letterpress Stamp A 2-3
LETTERPRESSING
TODO™ Hot Foil & Letterpress Stamp C & A 6-8
NOTE: The weight of the material that you are using will determine the exact amount of pressure that
you need to use. For example, with paper or vellum you may need to increase the pressure, but with
a thicker card, such as 250gsm or 300gsm you may need to reduce the pressure down by one or two
settings to account for the extra thickness within the sandwich.
NOTE: If you have any difficulties moving the roller over the sandwich, it may be caused by an
incorrect combination of plates or dial setting. Position the roller back to its starting position and check
your plate combination and/or try a different dial setting. Forcing the roller over an incorrectly stacked
sandwich will cause damage to your machine and will void the warranty.
† Remove Base Plate Insert / *Some complex dies may require an additional shim
DO NOT PUSH THE ROLLER HOUSING,
ALWAYS USE THE HANDLE TO MOVE THE
ROLLER BACK AND FORWARD.
NEVER LIFT THE TODO MACHINE BY THE
ROLLER MECHANISM.
ADJUST THE PRESSURE
0 = CLOSED ROLLERS
12 = FULLY OPEN ROLLERS