Tobii X2-60, Руководство пользователя

Страница: 14 / 44

8. Position the Tobii X2 Eye Tracker and attach it to the mounting
bracket as shown in the figure to the right. Make sure to position it
in the right way so that the mounting bracket fits exactly in the slot
on the back of the eye tracker. The magnet inside will keep the eye
tracker in place.
Do NOT connect the Tobii X2 Eye Tracker to the computer
before running the installation software provided on the USB memory stick . Connecting the eye tracker prematurely
can lead to the eye tracker not being installed properly.
4.2.2 Mounting the Tobii X2 Eye Tracker Using a Desk Stand/Tripod
A desk stand is available as an accessory for the Tobii X2 Eye Trackers, and it is to be used for setups where the eye tracker is
not attached to the screen where the stimuli are presented, such as projection screen setups. It can be mounted on a tripod with
the supplied tripod screw nut. A typical setup using the Tobii X2 Eye Tracker mounted on a tripod is described in section
6.3
Physical Object Setup, page 23.
To mount the Tobii X2 Eye Tracker on the desk stand:
1. Position the Tobii X2 Eye Tracker and attach it to the mounting
bracket. Make sure to position it in the right way so that the mount-
ing bracket fits exactly in its slot on the back of the eye tracker.
2. The desk stand is made out of bendable metal. You can change the tilt angle of the eye tracker by bending the desk stand
firmly by hand. Remove the eye tracker before bending the desk stand.
Please note that when you use a setup where the eye tracker is not mounted on the screen used for presenting the
stimuli, you need to run the X Configuration Tool to configure the corresponding distances and angles. Please read
section
4.7 The X Configuration Tool, page 15.
8
4 Setting Up the Tobii X2 – 60 Eye Tracker Tobii X2-60 Eye Tracker User ’ s manual v.1.0.3 - en-US