Page 6 of 22
• Support for remote supervisor intercom, one-button call to the terminal specified by the server.
• Intelligent equipment self-check, detects the state of internal and external components. Abnormalities
are indicated with a local prompt.
• Distinguished LED shows the state of the internal window intercom.
• Accessible via an Ethernet port and LAN network.
1.4. Hardware Interface Introduction
1.4.1. Internal Window Intercom Module
【
Front
】
①
Network status indication: red light is offline, green light is online
②
Gooseneck microphone socket: plug the gooseneck microphone and fix the screw.
③
Loudspeaker: amplify the audio from the external window intercom.
④
Voice broadcast button/remote intercom button (left):
• When the intercom button
⑥
is on (blue light ON):
• Press voice broadcast button shortly to broadcast "Hello, welcome" message.
• Press long (1 second) to broadcast "Thank you, welcome next time".
The broadcast button flashes green during broadcasting.
⑤
Remote intercom button (right): when the terminal is connected to the server, press button to make a call to
the supervisor intercom terminal specified by the server.
⑥
Intercom button: press the button to communicate with the external window intercom, finish the
conversation by pressing the button again. The intercom button light blue during conversation.
