Page 10 of 22
2.2. Wiring
1. Connect the connector of the power adapter to the power interface of internal window intercom (red
colored connector).
2. Connect the connector of the external window intercom module with the corresponding connector of
the internal window intercom module.
3. Connect the Ethernet LAN cable to the RJ45 connector of the internal window communication module.
2.3. Basic Network Settings
2.3.1. Using the Terminal Scanning Tool
1. Locate and run “DevConfigTool.exe” in the folder [optical disc:\tool software\ ].
Enter the default password “123456”.
2. Select the right tab
【
Mandatory config
】
, and fill out the correct parameters in the
【
terminal
parameters
】
section. Click "send parameters" button to complete the IP parameters Settings.
