Toa M-800RC Скачать руководство пользователя страница 8

Страница: 8 / 50

Environment:

The M-8080D can be programmed by using the software editor available with the device. It works with
Windows7 above.

Attention:

a. In order to use the software. M-8080D and the PC must be in a LAN environment.
b. At the moment, all must be connected to a network router by CAT5 cable.

Connection Example:

M-8080D

Multichannel Amplifier

Speaker

Multichannel Amplifier

M-800RCT

M-800RM

The green pair is reserved for data communications between

M-8080D

and remote device. Data

communication is needed to send configuration information, software update and status information from

M-8080D

to remote device.

Note: Configuration information of remote device (such LED illuminate status, microphone sensitivity,
channel name, etc.) is stored in

M-8080D

, not in the remote devices. This makes easy to swap for a new

remote device without losing the configured information.

The orange and blue pairs carry two channels each of balanced differential AES3 digital audio.

refers

to audio that the remote device sends to

M-8080D

refers to audio that remote device receives from

M-8080D

The brown pair provides 24VDC power and ground for the remote device.

Pins meaning of RD port:

1-  AES TX +
2-  AES TX-
3-  AES RX+
4-  RS485 TX

5- RS485 RX
6- AES RX-
7- DC24V
8- GND

MD-200CTU

ROUTER

Содержание M-800RC



















































Результаты поиска

Содержание M-800RC

Отзывы:

Toa M-800RC, Руководство по эксплуатации, Страница: 8 / 50

Результаты поиска

Содержание M-800RC

Отзывы: