Digital mixer D-2000 Series
TOA Corporation
TOA Corporation
TOA Corporation
TOA Corporation
4/37
■
Control Command and Setting Value
Channel Fader Gain (Position)
Set the input , bus and output channel fader gains by position.
For the relationship of position to gain (dB), refer to the Position vs. Gain Table for Fader.
The D-2008SP transmits changed value data after receiving this command.
91H, 03H, <Channel Attribute>, <Channel 1umber>, <Position>
<Channel Attribute>
00H: Audio In channel
01H: Audio Out channel
02H: CobraNet In channel
03H: CobraNet Out channel
04H: Audio Bus channel
05H: Ext. In channel
06H: CobraNet Bus channel
<Channel Number>
When Channel Attribute=00H: 00H - 21H (Audio In channel 1 – 34)
When Channel Attribute=01H: 00H - 1FH (Audio Out channel 1 – 32)
When Channel Attribute=02H: 00H - 0FH (CobraNet In channel 1 – 16)
When Channel Attribute=03H: 00H - 0FH (CobraNet Out channel 1 – 16)
When Channel Attribute=04H: 00H - 17H (Audio Bus channel 1 – 24)
When Channel Attribute=05H: 00H - 03H (Ext. In channel 1 – 4)
When Channel Attribute=06H: 00H - 0FH (CobraNet Bus channel 1 – 16)
<Position>
00H - 3FH
(-INF - +10dB, see the Position vs. Gain Table)
Example of setting Audio In channel 1 fader gain to 0 dB:
91H, 03H, 00H, 00H, 2AH
Channel Fader Gain (Step)
Set the input, bus and output channel gain positions by the number of steps.
Positions can be varied from the current status by the designated number of steps.
One position varies per step.
The D-2008SP informs position values changed by step Up or Down.
91H, 03H, <Channel Attribute>, <Channel 1umber>, <Step>
<Channel Attribute>
00H: Audio In channel
01H: Audio Out channel
02H: CobraNet In channel
03H: CobraNet Out channel
