Digital mixer D-2000 Series
TOA Corporation
TOA Corporation
TOA Corporation
TOA Corporation
11/37
02H: CobraNet In channel
03H: CobraNet Out channel
04H: Audio Bus channel
05H: Ext. In channel
06H: CobraNet Bus channel
<Channel Number>
When Channel Attribute=00H: 00H - 21H (Audio In channel 1 - 34)
When Channel Attribute=01H: 00H - 1FH (Audio Out channel 1 - 32)
When Channel Attribute=02H: 00H - 0FH (CobraNet In channel 1 - 16)
When Channel Attribute=03H: 00H - 0FH (CobraNet Out channel 1 - 16)
When Channel Attribute=04H: 00H - 17H (Audio Bus channel 1 - 24)
When Channel Attribute=05H: 00H - 03H (Ext. In channel 1 - 4)
When Channel Attribute=06H: 00H - 0FH (CobraNet Bus channel 1 - 16)
<Group Number>
0: Group OFF
1-127: Group ON
Example of setting Audio In channel 1 to Group 1:
9AH, 03H, 00H, 00H, 01H
Fader Group Fine Trim
Set the Fader Group Fine Trim of the input, bus and output channels.
For the relationship of position to fine trim (dB), refer to the Position vs. Fine Group Trim Table for Fader.
Note: It’s different form the Position vs. Fine Gain Table for Fader.
As for the trim setting, a fader group number is invalid in the case of 0.
In the case of a stereo channel, the R channel side does not accept a command.
The D-2008SP transmits changed value data after receiving this command.
9BH, 04H, <Channel Attribute>, <Channel 1umber>, <Position(U)>, <Position(L)>
<Channel Attribute>
00H: Audio In channel
01H: Audio Out channel
02H: CobraNet In channel
03H: CobraNet Out channel
04H: Audio Bus channel
05H: Ext. In channel
06H: CobraNet Bus channel
<Channel Number>
When Channel Attribute=00H: 00H - 21H (Audio In channel 1 - 34)
When Channel Attribute=01H: 00H - 1FH (Audio Out channel 1 - 32)