Digital mixer D-2000 Series
TOA Corporation
TOA Corporation
TOA Corporation
TOA Corporation
10/37
Output Matrix Crosspoint Gain
Set the crosspoint gains by position.
The D-2008SP transmits changed value data after receiving this command.
97H, 05H, <Bus Channel Attribute>, <Bus Channel 1umber>, <Destination Channel Attribute>,
<Destination Channel 1umber>, <Value>
<Bus Channel Attribute>
04H: Audio Bus channel
05H: Ext. In channel
06H: CobraNet Bus channel
<Bus Channel Number>
When Bus Channel Attribute=04H: 00H - 17H (Audio Bus channel 1 - 24)
When Bus Channel Attribute=05H: 00H - 03H (Ext. In channel 1 - 4)
When Bus Channel Attribute=06H: 00H - 0FH (CobraNet Bus channel 1 - 16)
< Destination Channel Attribute>
01H: Audio Out channel
03H: CobraNet Out channel
< Destination Channel Number>
When Destination Channel Attribute=01H: 00H - 1FH (Audio Out channel 1 - 32)
When Destination Channel Attribute=03H: 00H - 0FH (CobraNet Out channel 1 - 16)
<Value>
00
～
46H : For the relationship of position to gain (dB), refer to Value vs. Gain Table for crosspoint gain.
60
～
6FH : Position Down (1-16 Step Down)
70
～
7FH : Position Up (1-16 Step Up)
Example of setting the crosspoint gain from Audio Bus channel 1 to Audio Out channel 1 to 0dB:
97H, 05H, 04H, 00H, 01H, 00H, 46H
Example showing 3-step Up of Audio Bus channel 1 to Audio Out channel 1 crosspoint gain
97H, 05H, 04H, 00H, 01H, 00H, 72H
Fader Group
Set the Fader Group of the input, bus and output channels.
When a group number is already set, it is necessary to set other numbers after changing it to 0 once.
In the case of a stereo channel, the R channel side does not accept a command.
The D-2008SP transmits changed value data after receiving this command.
9AH, 03H, <Channel Attribute>, <Channel 1umber>, <Group 1umber>
<Channel Attribute>
00H: Audio In channel
01H: Audio Out channel
