manualshive.com logo in svg

Toa D-001R, Руководство пользователя, Страница: 22 / 56

Поделиться
Скачать
Toa D-001R Скачать руководство пользователя страница 22

2. 

The next step is to 

assign the modules

 to each slot. This must accurately correspond 

to the actual hardware that is loaded into the 9000 unit’s frame. A mismatch may 
cause a malfunction and will certainly produce a configuration error, when uploading 
files to the unit. (*see section 1 “Hardware Configuration”).  

a. The 

Stereo Link

 feature is available in MIXER mode only. It allows linking of 

both inputs of each two-channel input or output module. Volume, EQ and other 
channel setting may be adjusted on one channel and the linked channel’s 
settings automatically follow. This is useful for stereo zone applications (not 
available for AN-001T, ZP-001T or 900 Series modules). 

3. 

With each module populated, a 

label “strip”

 will appear on the right, corresponding to 

each module’s input/output complement. You may enter a 7 character alphanumeric 
name for each input and output. 

4. 

The 

KEY LOCK

 Section allows each input & output as well as the Utility menu & 

Power button to be individually or collectively locked to deny unauthorized access. A 
4-digit numeric password may be entered (1-8), which will be required to enter a 
locked area from the 9000 unit’s front panel. When the “ENTER PASSWORD” display 
pops up, the password is entered using the front panel channel select (1-8) buttons. 

(Note: KEY LOCK should only be set once you have completed all setup and 
adjustments and are ready to turn the system over to the customer.) 

5.  I/O Module Settings

 page. This sections displays all the modules assigned to the 

frame slots and clicking on any of these accesses the Module Settings page (see 
below). 

MAIN FRAME OUTPUT

 –Also accesses the I/O Module Settings Page.  

6.  MAIN FRAME CONTROL 

Accesses the controller assignment settings for external 

contact closures and relay outputs.  

7. REMOTE

 Accesses programming for ZM control modules or volume controls.  

8.  SCENE / EVENT

. This button opens either the SCENE page (MIXER Mode) or 

EVENT Page (MATRIX Mode), depending on the operating mode and will be labeled 
accordingly. 

 

L

 In GUI v2.10, there is a SAVE prompt window which appears when 

attempting to close a page where a parameter has been change. This will 
appear on the I/O Configurations Page and will ask if you will exit without 
saving (Yes), Cancel exit (No) or Save to a Scene memory (Scene). It will 
also appear on the EQ page (input & output). 

 

 
 
 
 
 
 
 
 
 
 

 

22

Содержание D-001R

























































Отзывы:

Нет отзывов