When moving the setting item on the same screen:
16
Example of using the
Up
and
Down
arrows:
When accessing parameter or item pages within the settings menu:
HPF - 400HZ LPF – 12.5
IN 1 – INPUT 1
HPF - 400HZ LPF – 12.5
IN 1 PRIORITY 8
d. Returning to NORMAL operation:
Press the
ESCAPE/BACK
key when the
setting screen returns the display to the setting start screen (upper hierarchy level).
e.
Pressing the
MEMORY
key at the setting menu screen saves the setting contents
and returns the display to the normal use state.
d. How do I program an Event in Matrix Mode from the front panel?
Programming EVENTS in Matrix Mode is broken down to essentially four parameters:
INPUT SELECT, EVENT TYPE, TRIGGER & OUTPUT ASSIGNMENT. Here is the
procedure for EVENT settings:
1.
Hold
UTILITY
button 3-5 Seconds
2.
Then rotate
PARAMETER
knob to
EVENT-SETTING
.
3.
Press the
RIGHT ARROW
to
EVENT01
(01 Flashing):
NONE
4.
Then press the
RIGHT ARROW
TO
EVENT01: NONE
(NONE Flashing).
5.
Rotate
PARAMETER
knob to
ROUTE
.
6.
Press the
DOWN ARROW
and select
INPUT#
using the
PARAMETER
knob (or
INPUT
SELECT
button),
7.
Press the
DOWN ARROW
and select the
OUTPUT#
using the
PARAMETER
knob,
8.
Then press the
ON/OFF
button (above the OUTPUT SEL button) to turn on a RED LED
next to the appropriate OUTPUT# channel indicator on the display
.
9.
Press the
DOWN ARROW
and select the
TRIGGER IN
using the
PARAMETER
knob
10.
Press the
RIGHT ARROW
to the
TRIGGER IN #
and select a trigger in using the
PARAMETER
knob.
11.
Follow steps
d
&
e
above to escape the EVENT SETTING menu.