Toa AM-CF1 Скачать руководство пользователя страница 5

5

2. geNeRAL deSCRIPTION

The  AM-CF1B  and  AM-CF1W  Integrated  Audio  Collaboration  Systems  are  designed  to  be  used  in  huddle 

rooms or workspaces. 

Software web conferences can be carried out more effectively over laptops by connecting the AM-CF1 to the 

PCs or web cameras. Even when the conference has multiple participants, not only can each participant’s voice 

be accurately picked up, but each other party’s voice can also be reproduced clearly.

Note: The AM-CF1B and AM-CF1W are collectively referred to as "AM-CF1" in this manual.

3. FeATUReS

•  TOA’s unique algorithm detects the speaker’s position and controls the array microphone’s directivity in real 

time, allowing the speaker’s voice to be more effectively picked up.  

•  The sound source direction detected by the microphone can be displayed on the front panel LED indicator to 

inform the speaker that his or her voice is being picked up. 

•  A built-in USB hub allows connection to web cameras, etc. 

•  Various settings can be performed for echo cancellation, equalization and the like using a web app.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type 

and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential 

radio interference to other users, the antenna type and its gain must be so chosen that the equivalent 

isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec 

une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. 

Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut 

choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne 

dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.

This device complies with Industry Canada’s license-exempt RSS standard(s). Operation is subject to 

the following two conditions: 

(1)  this device may not cause interference, and 

(2)  this device must accept any interference, including interference that may cause undesired operation 

of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts 

de licence. L’exploitation est autorisée aux deux conditions suivantes : 

(1)  l’appareil ne doit pas produire de brouillage, et 

(2)  l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est 

susceptible d’en compromettre le fonctionnement.

Содержание AM-CF1





















Отзывы: