14
9. OPeRATION
9.1. Turning Power ON and OFF
Connecting an AC adapter or a PoE extender (p. 9) to the AM-CF1 unit turns ON the power. In about
approximately 60 seconds, the unit is set to “Normal Operation” mode and can be used. After use, switch the
unit to “Power Standby” mode. When using the unit again, switch back to “Normal Operation” mode.
Each state of operation is shown as follows by the Power indicator:
Power indicator
Operating Status
Lighting Status
[When power
is ON]
Start processing in
progress
Blue
Flashing
blue-green
Green
Unit initialization in progress Orange
Normal operation mode
Green
Power OFF processing in
progress
Red
Flashing
blue-green
Blue
Power standby mode
Red
Power OFF
Extinguished
9.2. Switching between Power Standby and Normal Operation modes
Step: Hold down the power switch for approximately 3 seconds.
The mode switches between the two.
9.3. Turning Power OFF
Turn OFF the power when detaching the AC adapter or PoE extender.
Note
Do not detach the AC adapter or PoE extender from the unit or turn OFF the power of these devices until the
power indicator lights blue. Doing so could cause the unit’s failure.
Step: Hold down the power switch for approximately 10 seconds.
The power is first set to the Power OFF state and then turns off after approximately 30 seconds.
