background image

"""#$%&'()*+$,'-.#/0%

9 / 26 

$122!34556789::8:;78<97=

 

I M P O R T A N   S A F E T Y   I N F O R M A T I O N

Storage Safety 

1. Store the unit in an area away from human activity.

2. Do not children to play on or around the stored machine.

3. Store the unit in a dry, level area. Support the frame with planks if required.

Operation Safety 

Read and understand operator's manual before starting. Review safety instructions annually.

Turn machine off, stop engine, remove ignition key and place in your pocket, set park brake and wait for all

moving parts to stop before servicing, adjusting, repairing, or unplugging.

Keep the working area clean and free of debris to prevent tripping. Operate only on level ground.

Close and secure rotor cover before operating.

Close and secure all guards, deflectors, and shields before starting and operating.

Keep hydraulic lines and fittings tight, in good condition and free of leaks.

Do not point discharge at people, animals or buildings. Rotor can expel wood chips fast enough to cause

injury.

Do not allow children, animals, or unauthorized people into the working area.

Do not run machine inside a closed building to prevent asphyxiation from engine exhaust.

Use care when feeding material into chipper. Do not send metal, bottles, cans, rocks, glass or other foreign

material into wood  chipper. If foreign material enters chipper, stop machine, turn engine off and place

ignition key in your pocket and wait for all moving parts to stop before removing material and/or unplugging.

Inspect machine for damaged or loose parts before resuming work.

Always wear P.P.E. (Personal Protective Equipment) such as safety goggles and heavy gloves whenever

operating machine.

Do not place hands or any body parts into feed hopper during operation.

Do not move or transport chipper when the rotor is turning.

Do not exceed a safe travel speed when transporting.

Содержание WC62




























Отзывы: