background image

"""#$%&'()*+$,'-.#/0%

4 / 26 

$122!34556789::8:;78<97=

 

I M P O R T A N   S A F E T Y   I N F O R M A T I O N

Safety Training 

1. Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to

provide safe equipment can be wiped out by a single careless act of an operator or bystander.

2. In addition to the design and configuration of equipment, hazard control and accident prevention are

dependent upon the awareness, concern, prudence, and proper training of personnel involved in the

operation, transport, maintenance, and storage of this equipment.

3. It has been said, "The best safety feature is an informed, careful operator." We ask you to be that kind of an

operator. It is the operator's responsibility to read and understand ALL Safety and Using instructions in the

manual and to follow these. Accidents can be avoided.

4. the machine. If this machine is used by any person other than yourself, or is loaned or rented, it is the

machine owner's responsibility to make certain that the operator, prior to using:

a. Reads and understands the operator's manuals.

b. Is instructed in safe and proper use.

5. Know your controls and how to stop the tractor and machine quickly in an emergency. Read this manual and

the one provided with tractor.

6. Train all new personnel and review instructions frequently with existing workers. Be certain only a properly

trained and physically able person will use the machinery. A person who has not read and understood all

using and safety instructions is not qualified to use the machine. An untrained operator exposes himself and

bystanders to possible serious injury or death. If the elderly are assisting with the work, their physical

limitations need to be recognized and accommodated.

Safety Signs

1. Always keep safety signs clean and legible.

2. Replace safety signs that are missing or have become illegible.

3. Replaced parts that displayed a safety sign should also display the current sign.

4. Safety signs displayed in Section 3 each have a part number in the lower righthand corner. Use this part

number when ordering replacement parts.

5. Safety signs are available from your authorized Distributor or Dealer Parts Department or the factory.

Содержание WC62




























Отзывы: