"""#$%&'()*+$,'-.#/0%
15 / 26
$122!34556789::8:;78<97=
O P E R A T I O N
6. Install the PTO drive line:
($&)
!
Be sure the telescoping portion of the shaft is greased and free of dirt.
a. Slide the collar back on the yoke, align the splines and slide the yoke on the tractor.
b. Release the collar and make sure the locking pin clicks into position.
7. Slowly raise the machine through its working range to make sure the telescoping portion of the PTO
shaft doesn't bottom out.
8. Level the machine front and rear, and side to side using the jackscrew on the right arm and the
turnbuckle on the top link.
9. The chipper should always be level on the ground in its working position.
10. To unhook from the tractor, reverse the above procedure. Always park the machine in a dry, level area.
If vandalism is a problem, remove the PTO drive line and store in a secure place.
