W W W . T M G I N D U S T R I A L . C O M
P 0 4 / 4 1
T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
IMPORTANT
SAFETY INSTRUCTIONS
1.
READ AND UNDERSTAND
all safety warning
procedures before operatingunit.
2.
KEEP HANDS AND FEET CLEAR
. Remove hands and
feet from any movingparts.
3.
KEEP WORK AREA CLEAN
. Cluttered work areas invite
injuries.
4. Consider work area environment. Do not expose
equipmentto rain.
DO NOT
use in damp or wet locations.
Keep area welllighted.
5.
ONLY TRAINED OPERATORS
should operate this
equipment. All non-trained personnel should be kept away
from work area. Never let non-trained personnel come in
contact with, oroperate machine.
6.
USE MACHINE CORRECTLY
. Use machine in the proper
manner. Never use adapters other than what is approved by
the manufacturer.
7.
DO NOT
override or disable safety valves and/or devices.
8.
ALWAYS INSURE
that the arm lock is engaged before any
attempt is made to service wheels and/or tires.
9.
DRESS PROPERLY
. Non-skid steel-toe footwear is
recommended when operatingmachine.
10.
GUARD AGAINST ELECTRIC SHOCK
. This equipment
must be grounded while in use to protect the
operator from electric shock. Never connect
the green power cord wire to a live terminal.
This is for ground only.
11.
DANGER!
The motor on this machine contains high
voltage. Disconnect power at the receptacle before
performingany electrical repairs.Secure plug so that it cannot
be accidentally plugged in during service.
12.
WARNING! RISK OF EXPLOSION
. This equipment has
internal arcing or sparking partswhich should
not be exposed to flammable vapors. This
machine should not be located in a recessed
area or below floor level.
13.
MAINTAIN WITH CARE
. Keep unit clean for better and
safe performance. Follow manual for proper lubrication and
maintenance instructions. Keep control pedals and/or buttons
dry, clean and free from grease and oil.
14.
STAY ALERT
. Watch what you are doing. Use common
sense. Be aware.
15.
CHECK FOR DAMAGED PARTS
. Check for conditionof
all moving parts, breakage of parts or any condition that may
affect the machines operation. Do not use if any component
is broken or damaged.
16.
NEVER
remove safety related components or device
from the machine. Do not use if safety related components
are damaged or missing.
17. To reduce fire hazard, keep engine/
motor exterior free of oil, solvent, or
excessive grease.
18. Unreadable and missing warning labels must be
replaced immediately. Do not use the tire changer if one or
more labels are missing. Do not add any object that could
prevent the operator from seeing the labels.
