TMC TI5VG+, Руководство пользователя

Страница: 17 / 68

Chapter 4 Hardware Settings
TI5VG+ User’s Manual 13
Chapter 4 Hardware Settings
The following sections describe the necessary procedures and proper
jumper settings to configure the TI5VG+ motherboard.
4.1 SW1(1-8): CPU Frequency Selector ......................................... 15
4.2 JP1: DRAM Operating Frequency ............................................ 20
4.3 SW2(1-4): CPU Voltage Selector ............................................. 20
4.4 JP5: Clear CMOS Selection ...................................................... 22
In the case your motherboard TI5VG+-100MHz has a processor
supporting 100MHz CPU clock (such as AMD K6-300) and your DIMM
module is PC100 compliant, the SDRAM clock can be set to 100MHz.
Otherwise, set the SDRAM clock at 66MHz.
For the locations of the jumpers, refer to Figure 2 on the following page.
The following examples show the conventions used in this chapter
Jumper Open
Jumper Closed
Switch 1 and switch 2 are set to OFF.
Switch 3 and switch 4 are set to ON.