TMC TI5VG+, Руководство пользователя

Страница: 54 / 68

Chapter 6 BIOS Configuration
50 TI5VG+ User’s Manual
PNP OS Installed
This field allows you to specify if the operating system installed in your
system is plug and play aware.
Note: Operating systems such as DOS, OS/2, and Windows 3.x do not
use PnP.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically. However, this capability needs you to use a PnP operating
system such as Windows 95. The default value is
Manual.
Reset Configuration Data
This field allows you to determine whether to reset the configuration data
or not. The default value is
Disabled.
ACPI I/O Device Node
This field enables or disables the ACPI I/O Device Node. The default
setting is
Disabled .
IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to
These fields allow you to determine the IRQ/DMA assigned to the ISA
bus and is not available to any PCI slot.
CPU to PCI Write Buffer
When enabled, this option increase the efficiency of the PCI bus to and
speed up the execution in the processor. By default, this field is set to
Enabled .
PCI Dynamic Bursting
When enabled, this option combines several PCI cycles into one. By
default, this field is set to
Enabled
.
PCI Master 0 WS Write
When enabled, this option increases the write cycle speed. By default,
this field is set to
Enabled .
PCI Delay Transaction
When enabled, this option delays PCI data transaction. By default, this
field is set to
Enabled .