manualshive.com logo in svg

TM RACING 250Fi MX, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
TM RACING 250Fi MX Скачать руководство пользователя страница 54

54

4   S T R O K E S

4   S T R O K E S

4   S T R O K E S

4   S T R O K E S

 

NISSIN FRONT BRAKE PUMP (EN/MX)

ADJUSTING THE LEVER POSITION

The position of the front brake lever compared to the grip can be changed 

with adjusting screw (1). Loosen counter-nut (2) and rotate the screw 

clockwise to move the lever away or anticlockwise to move the lever 

closer. Re-tighten the counter-nut (2).

 

WARNING

ONCE THE OPERATION IS COMPLETE, MAKE SURE THAT THE FRONT BRAKE 
LEVER HAS PLAY BEFORE ENGAGING THE BRAKE AND THAT THE FRONT WHEEL 
CAN ROTATE FREELY WITH THE LEVER AT REST. IF THERE IS NO PLAY, PRESSURE 
FORMS IN THE BRAKE SYSTEM. AS A RESULT, THE FRONT WHEEL BRAKE MAY 
FAIL DUE TO OVERHEATING OR TO THE WHEEL ITSELF LOCKING.

CHECKING BRAKE FLUID LEVEL

The fluid tank is part of the front brake pump located on the handlebar 

and is equipped with an inspection indicator (3). With the tank in horizontal 

position the fluid level must never drop below the indicator centreline.

IF THE BRAKE FLUID LEVEL DROPS BELOW THE MINIMUM VALUE IT MEANS 
THERE IS A LEAK IN THE BRAKE SYSTEM OR THAT THE BRAKE PADS ARE BE-
YOND THE LIMITS ALLOWED.

TOPPING UP BRAKE FLUID (A)

Remove screws (4), cover (5) and membrane (6). Place the tank horizon-

tally and top-up with DOT4 brake fluid up to the limit of the inspection 

indicator. Remount the membrane and cover and tighten the screws. Use 

water to wash away any brake fluid that has overflowed or was spilled.

-  STORE THE BRAKE FLUID OUT OF THE REACH OF CHILDREN.
-  BRAKE FLUID MAY IRRITATE SKIN. AVOID CONTACT WITH SKIN AND EYES. IF 

THE BRAKE FLUID SPLASHES IN THE EYES RINSE CAREFULLY WITH WATER 
AND SEEK MEDICAL ADVICE.

 

WARNING

-   KEEP THE BRAKE FLUID FROM COMING INTO CONTACT WITH PAINTED PARTS. 

BRAKE FLUID CORRODES PAINT. 

-   ONLY USE CLEAN BRAKE FLUID COMING FROM HERMETICALLY-SEALED 

CONTAINERS

6

4

5

DANGER

4.2 CHASSIS MAINTENANCE

1

2

3

DANGER

Содержание 250Fi MX









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды