manualshive.com logo in svg

TM RACING 250Fi MX, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
TM RACING 250Fi MX Скачать руководство пользователя страница 37

4   S T R O K E S

4   S T R O K E S

37

4   S T R O K E S

4   S T R O K E S

 

FILLING FUEL TANK

The type of fuel required for the TM engines is DIN EN228 unleaded 

fuel (ROZ 95).

The engine tolerates a percentage of ethanol lower than 10% (E10 fuel).

Tank capacity:

ALL 250Fi - ALL 450Fi ....................................................................... L 7.5 total
450F SMR/SMM - ALL 530F ........................  L 8.5 total, 2 of which are reserve

 

WARNING

FILL THE TANK WITH UNLEADED PETROL WITH A MINIMUM OCTANE NUMBER 
OF 95. NEVER USE PETROL WITH AN OCTANE NUMBER LOWER THAN 95, AS 
IT WOULD DAMAGE THE ENGINE.
FUEL EXPANDS WHEN HEATED THEREFORE, IN HIGH AMBIENT TEMPERA-
TURES, DO NOT FILL THE TANK UP TO THE UPPER EDGE.

PETROL IS HIGHLY FLAMMABLE AND TOXIC. HANDLE PETROL WITH THE 
UTMOST CARE. DO NOT FILL-UP WITH PETROL NEAR FLAMES OR LIT 
CIGARETTES. ALWAYS SWITCH THE ENGINE OFF WHEN FILLING UP WITH 
PETROL. NEVER POUR PETROL ONTO THE ENGINE OR ONTO THE EXHAUST 
PIPE. IMMEDIATELY REMOVE ANY SPILT PETROL WITH A CLOTH. IF PETROL IS 
SWALLOWED OR SPRAYED IN THE EYES, SEEK MEDICAL ADVICE IMMEDIATELY.

DANGER

3.9 REFILLING

Содержание 250Fi MX









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды