manualshive.com logo in svg

TM RACING 250Fi MX, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
TM RACING 250Fi MX Скачать руководство пользователя страница 18

18

4   S T R O K E S

4   S T R O K E S

4   S T R O K E S

4   S T R O K E S

 

STEERING LOCK (EN/SMR/SMM)

The steering lock (1) is located on the left side of the steering head.

This device allows you to block the rotation of the handlebar, preventing 

the motorcycle from being driven.

To lock the steering, rotate the handlebar fully to the right, move the 

protective tab (2), insert the key, turn it to the left and press it all the way 

down. Keeping it pressed down, turn it to the right and remove it.

   

WARNING

NEVER LEAVE THE KEY IN THE LOCK ONCE YOU HAVE LOCKED THE STEERING. 
THE KEY MAY BEND OR BREAK IF YOU STEER TO THE LEFT.

TANK CAP

The fuel cap (1) is located on top of the tank.

To open it, unscrew the tank cap by rotating it anticlockwise.

To close it, place the tank cap on the filler neck and rotate it clockwise. 

Arrange the tank bleeder hose (2) avoiding bends or crushing and make 

sure it is inserted correctly.

FUEL TAP (450F SMR/SMM - ALL 530F)

The tap (1) is found on the left side of the engine at the bottom of the tank.

OFF 

In the OFF position, the fuel tap is closed. 

ON 

In the ON position, the fuel tap is open.

 

Turn the knob to ON when using the motorcycle so that the fuel 

flows to the carburettor and the tank empties down to the reserve.  

RES 

IN the RES position, the reserve is used. After filling up, do not 

forget to move the knob back to the ON position. 

1

2.4 OTHER CONTROLS

1

1

Содержание 250Fi MX









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды