TM RACING 250Fi MX Скачать руководство пользователя страница 5

Страница: 5 / 104

4 T E M P I

IMPORTANT WARNINGS

ON LEGAL AND COMMERCIAL WARRANTY

WARNINGS ON WARRANTY

TM sport motorcycles are designed and manufactured to withstand stress that can be detected under normal road

and competitive use.

The competitive motorcycles comply with the rules of the respective categories currently in force at the most im-

portant international motorcycle associations.

Strictly comply with the control, maintenance, engine and chassis calibration provisions of the motorcycle indicated

in this manual to guarantee proper operation and prevent early wear of the motorcycle parts.

Incorrect engine or chassis calibration may affect your safety and the safety of others.

The maintenance operations described in the “Maintenance Schedule” must by carried out at a TM specialised

workshop at the scheduled intervals, otherwise the warranty is void and null.

To request spare parts, updates or report problems to TM, always specify the model, displacement, year of manu-

facture and serial number of the frame and the engine.

Use the fuels and lubricants indicated in the use and maintenance manual as described in the maintenance sched-

ule. Products of different brands cannot be used unless they have equivalent specifications.

In case of direct or indirect damage due to tampering with or modifications to the motorcycle, the legal warranty

is void and null.

Using the motorcycle under extreme conditions, e.g. on very muddy and wet terrain, may excessively wear com-

ponents, such as transmission parts or brakes. Therefore, maintenance or replacement of some parts may be

required before the normal interval indicated in the maintenance schedule.

USE OF ALL MX AND SMX MODELS IS NOT ALLOWED ON PUBLIC ROADS.

Should models 250Fi, 450Fi+F and 530F in versions END, SMR and SMM not comply with their respective approval

due to tampering or modifications, their use is no longer allowed on roads.

All the END models are designed to be used off-road (Enduro) and are not suitable for Motocross.

Содержание 250Fi MX









































































































Результаты поиска

Содержание 250Fi MX

Отзывы:

Бренды по названию

Популярные бренды

TM RACING 250Fi MX, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 250Fi MX

Отзывы:

Бренды по названию

Популярные бренды