background image

TEG-Y8F-M-00   20 August 2013

 

 

10. Troubleshooting 

 

When troubleshooting the strainer, all safety rules should be strictly obeyed 

Fault

 

Possible reason

 

Remedy

 

No flow   

Flange dust caps were not removed  Remove dust caps from flanges   
Dirty screen   

Clean or replace the screen   

Poor flow 

 

 

Clogged pipeline   

Check the pipeline   

Broken connecting flange  Bolts tightened unevenly   

Replace the strainer with new one 

11. Disposal 

Obsolete and dismantled strainers must not be disposed of with household waste. This 
product is made of materials which can be re-used and should be delivered to 

esignated recycling centers. 

d

 

12. Product Warranty 

 

1. Warranty Period 

One year following product delivery. 

2. Warranty Coverage 

TLV Euro Engineering GmbH warrants this product to the original purchaser 
to be free from defective materials and workmanship. Under this warranty, 
the product will be repaired or replaced at our option, without charge for 
parts or labor. 

3.  This product warranty will not apply to cosmetic defects, nor to any product 

whose exterior has been damaged or defaced; nor does it apply in the 
following cases: 
1)  Malfunctions due to improper installation, use, handling, etc., by other 

than TLV Euro Engineering GmbH authorized service representatives. 

2)  Malfunctions due to dirt, scale, rust, etc. 
3)  Malfunctions due to improper disassembly and reassembly, or 

inadequate inspection and maintenance by other than TLV Euro 
Engineering GmbH authorized service representatives. 

4)  Malfunctions due to disasters or forces of nature. 
5)  Accidents or malfunctions due to any other cause beyond the control of 

TLV Euro Engineering GmbH. 

4.  Under no circumstances will TLV Euro Engineering GmbH be liable for 

consequential economic loss damage or consequential damage to property. 

*  *  *  *  *  *  *

 

For Service or Technical Assistance: 

Contact your 

 

representative or your regional

 

 office. 

 

 

Daimler-Benz-Straße 16-18, 74915 Waibstadt, 

Germany

 

Tel: [49]-(0)7263-9150-0    Fax: [49]-(0)7263-9150-50 

 

Star Lodge, Montpellier Drive, Cheltenham, Gloucestershire, GL50 1TY, 

U.K.

 

Tel: [44]-(0)1242-227223    Fax: [44]-(0)1242-223077 

 

Parc d’ Ariane 2, bât. C, 290 rue Ferdinand Perrier, 69800 Saint Priest, 

France

 

Tel: [33]-(0)4-72482222    Fax: [33]-(0)4-72482220

   

Содержание Y8F Series









Отзывы: