3
Installation & Operational Considerations
Before installing the product, blow out the piping to remove any
piping scraps, dirt, oil and scale.
Failure to do so may lead to early clogging due to an initial heavy load
of foreign material in the piping.
Do not remove the product from its box or protective covering
until just prior to installation. Remove any plugs or seals just
prior to installation.
The protective covers keep damage causing foreign material out of
the product.
CAUTION
Do not use a wire-brush or other hard devices to clean the screen.
Doing so may damage or detach the meshed screen.
1. Product Description
Y strainers are provided with cast markings according to the requirements of the
PN-EN19 standard. The markings facilitate technical identification and contain:
・
nominal diameter DN (mm),
・
nominal pressure PN (bar),
・
body and cover material,
・
arrow indicating medium flow direction,
・
manufacturer,
・
heat number,
・
CE marking, for products subject to the 97/23/EC directive. CE marking starts from
DN32
2. Requirements for Maintenance Staff
The staff assigned to assembly, operation and maintenance tasks should be qualified
to carry out such jobs. During operation parts of the strainer, for example the cover or
body, may become hot and the user should take the appropriate measures to prevent
burns.
TEG-Y8F-M-00 20 August 2013
