172-65118MA-04 (T8N/TF8N/T10N/TF10N) 6 Oct 2021
4
Checking the Piping
Use only under conditions in which no water hammer will occur. If the
glass becomes damaged, subsequent fluid discharge could result in
injury or other damage.
WARNING
Check to make sure that the piping to which the product is to be connected has been
installed properly.
1. Is the pipe diameter suitable?
2. Has sufficient space been secured for maintenance?
3. Have maintenance valves been installed at the inlet and outlet?
Specifications
As glass parts will wear and deteriorate in quality, they should be
replaced annually. If the glass becomes damaged, subsequent fluid
discharge could result in injury or other damage.
WARNING
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate for detailed specifications.
* Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are
PRESSURE SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
** Valve No. is displayed for products with options. This item is omitted from the nameplate
when there are no options.
Model
Production Lot No.
Maximum Allowable
Temperature (TMA)*
Maximum Operating
Temperature (TMO)
Nominal Diameter
Maximum Allowable
Pressure*
Maximum Operating
Pressure
Valve No.**
