background image

 

172-65118MA-04  (T8N/TF8N/T10N/TF10N)    6  Oct  2021

 

6

 

Maintenance 

 

 

As glass parts will wear and deteriorate in quality, they should be 

replaced annually. Be careful not to damage the glass by striking it with 

objects or inflicting any other shocks. If the glass becomes damaged, 

subsequent fluid discharge could result in injury or other damage. 

 

WARNING 

 

 

Take measures to prevent people from coming into direct contact with 

product outlets. Failure to do so may result in burns or other injury from 

the discharge of fluids.

 

CAUTION 

 

 

Be sure to use only the recommended components when repairing the 

product, and NEVER attempt to modify the product in any way. Failure to 

observe these precautions may result in damage to the product or burns 

or other injury due to malfunction or the discharge of fluids.

 

CAUTION 

 

Operational Check 

A visual inspection of the following items should be done on a daily basis to 
determine whether the product is operating properly or has failed. Periodically (at 
least biannually) the operation should also be checked visually or by using diagnostic 
equipment, such as a stethoscope. 

If the product should fail, it may cause damage to piping and equipment, resulting in 
faulty or low quality products or losses.   

Normal  :  When flowing fluid is present, the ball moves. (The sound of flow can be 

heard.) (For T10N/TF10N/T10NL/TF10NL, when the flow of condensate 
is light, the sound of flow can be heard but the ball may not float.) 

 

Failure 

 

 

- Fluid leaks to the outside of the product.     
- The ball is not visible. 
- The ball does not move.   

Parts Inspection 

When parts have been removed, or during periodic inspections, use the following 
table to inspect the parts and replace any that are found to be defective. 

Procedure

 

Gaskets:     

Check for warping or damage 

Glass:     

Check for fractures or cracks 

Guard Plate:   

Check for fractures or cracks 

Ball:     

Check for deformation 

 

Содержание T10N














Отзывы: