Disassembly / Reassembly
(to reassemble, follow procedures in reverse)
During Reassembly
Part & No.
During Disassembly
Drain Plug 10
Wrap threads with 3 - 3.5 turns of sealing
tape, tighten to the proper torque
Use a wrench to remove
Coat threads with anti-seize, tighten to
proper torque
Cover Bolt 9
Use a wrench to remove
Reattach with writing in the proper orientation
Cover 2
Remove
Replace with a new gasket only if warped or
damaged, do not apply anti-seize
Cover Gasket 8
Remove gasket and clean
sealing surfaces
Insert into body, being careful not to scratch its
polished surface
Float 3
Remove, being careful not to
scratch its polished surface
Coat threads with anti-seize, tighten to proper
torque
Orifice 4
Use a wrench to remove
Replace with a new gasket only if warped or
damaged, do not apply anti-seize
Orifice Gasket 5
Remove gasket and clean
sealing surfaces
Coat threads with anti-seize
Orifice Plug 20
Use a wrench to remove
Replace with a new gasket,
coat surfaces with anti-seize
Orifice Plug Gasket 21 Remove gasket and clean
sealing surfaces
Coat threads with anti-seize, tighten to proper
torque
Screen Holder 7
Use a wrench to remove
Replace with a new gasket, apply anti-seize to
both sides
Screen Holder
Gasket 12
Remove gasket and clean
sealing surfaces
Insert closed end first so that the open end is at
the opening in the body
Screen 6
Remove being careful not to
bend
Coat threads with anti-seize, tighten to proper
torque
X-element Cover 19
Use a wrench to remove
Replace with a new gasket only if warped or
damaged, do not apply anti-seize
X-element Cover
Gasket 14
Remove gasket and clean
sealing surfaces
Use appropriate pliers and insert the spring clip
into the slots in the X-element guide
Spring Clip 18
(X-element)
Use appropriate pliers to
squeeze and remove
Reinstall, making sure the X-element is not
upside down and without catching on the X-
element guide
X-element 17
Remove from the X-element
guide with appropriate pliers
grasping the ball at the top
of the element
Coat threads with anti-seize and tighten to the
proper torque
Air Vent Valve
Seat 16
Use a socket wrench to
remove
Fix with Valve Seat and make sure the X-element
can be inserted smoothly
X-element Guide 15
Remove without bending
Insert securely without bending
X-element Screen 13
Remove without bending
English
